Geomembrane is very low permeability synthetic membrane liner or barrier used with any geotechnical
engineering related material so as to control fluid (or gas) migration in a human-made project,structure,
or system.Geomembranes are made from relatively thin continuous polymeric sheets,but they can also
be made from the impregnation of geotextiles with asphalt,elastomer or polymer sprays,or as multilayered
bitumen geocomposites.Continuous polymer sheet geomembranes are,by far,the most common.
New Materials HDPE liner Production
Main Features
1.Waterproof and impermeable
2.UV resistance
3.High tearing resistance
4. Puncture-resisting
5.Nontoxic,non-tasteness.Long life:over 100 years underground without sunlight.
New Materials PROJECT SHOW
New Materials HDPE liner Welding machine
For HDPE liner shipment, in order to avoiding water when shipping on the boat, we specially use a thin layer plastic firm to package the geomembane in the side, then white or black woven bags for outside, paper tube inside, easy to load and download.
Paste our label or as per client request, loading them into container safely at our factory, make all goods arriving clients no damage, keep perfect. They are packed in the woven bags 50m/roll,100m/roll or follow your demand
Shipping: load container directly from our plant by truck, then go to the port, than go your site by sea.
Application Features
1, Separation: the prevention from intermixing of adjacent dissimilar soils and or materials
2, Filtration: the retaining of soil or other particles subject to hydrodynamic forces while allowing the passage of fluids into or through the geosynthetic.
3, Drainage: the collecting and transmitting of precipitation, ground water and or other liquids or gases along the plane of the geosynthetic.
4, Reinforcement: the use of the properties of a geosynthetic to improve the mechanical properties of soil or other construction materials.
5, Barrier: the prevention or reduction of the movement of any fluid through a construction by the use of a geosynthetic barrier.
6, Protection: the use of a geosynthetic material as a localised stress reduction or dissipation layer to prevent or reduce damage to a given surface, material or layer.
7, Surface erosion control: the use of a geosynthetic to prevent soil or other particle movements on the surface of a slope.
8, Stabilization: improvement of the mechanical behaviour of an unbound granular material by including one or more geosynthetic layers such that deformation under applied loads is reduced by minimizing movement of the unbound granular material.
9, Convenience:Reflective factor, good welding performance and convenient construction
engineering related material so as to control fluid (or gas) migration in a human-made project,structure,
or system.Geomembranes are made from relatively thin continuous polymeric sheets,but they can also
be made from the impregnation of geotextiles with asphalt,elastomer or polymer sprays,or as multilayered
bitumen geocomposites.Continuous polymer sheet geomembranes are,by far,the most common.
New Materials HDPE liner specifications
| Product | High quality HDPE liner film, HDPE geomembrane | ||
| Standard | GM13-smooth | Certifitcation | CE/ISO/BTTG/TRI |
| Thickness | 0.2mm-3.0mm | Technology | Blowing |
| Width | 2m-8m | Material | HDPE/LDPE/LLDPE |
| Length | 50m-100m | Original | China |
New Materials HDPE liner technical datas
| Smooth HDPE geomembrane-GM13(ASTM) technical data | |||||||
| Properties | Test Method | Test Value | |||||
| 0.75 mm | 1.00 mm | 1.25 mm | 1.50 mm | 2.00 mm | 2.50 mm | ||
| Thickness (min. ave.)· lowest individual of 10 values | D5199 | nom -10% | nom -10% | nom -10% | nom -10% | nom -10% | nom -10% |
| Density (min.) | D 1505/D 792 | 0.94 | 0.94 | 0.94 | 0.94 | 0.94 | 0.94 |
| yield strength | D 6693 | 11 kN/m | 15 kN/m | 18 kN/m | 22 kN/m | 29 kN/m | 37 kN/m |
| break strength | 20 kN/m | 27 kN/m | 33 kN/m | 40 kN/m | 53 kN/m | 67 kN/m | |
| yield elongation | 12% | ||||||
| break elongation | 700% | ||||||
| Tear Resistance (min. ave.) | D 1004 | 93 N | 125 N | 156 N | 187 N | 249 N | 311 N |
| Puncture Resistance (min. ave.) | D 4833 | 240 N | 320 N | 400 N | 480 N | 640 N | 800 N |
| Stress Crack Resistance (2) | D 5397 | 300 hr. | |||||
| Carbon Black Content - % | D 4218 | 2.0-3.0% | |||||
| Oxidative Induction Time (OIT) (min. ave.) | |||||||
| (a) Standard OIT | D 3895 | 100 min. | |||||
| (b) High Pressure OIT | D 5885 | 400 min. | |||||
| Oven Aging at 85°C | |||||||
| (a) Standard OIT (min. ave.) - % retained after 90 days | D 3895 | 55% | |||||
| (b) High Pressure OIT (min. ave.) - % retained after 90 days | D 5885 | 80% | |||||
| UV Resistance | |||||||
| High Pressure OIT (min. ave.) - % retained after 1600 hrs | D 5885 | 50% | |||||
New Materials HDPE liner Production
Main Features1.Waterproof and impermeable
2.UV resistance
3.High tearing resistance
4. Puncture-resisting
5.Nontoxic,non-tasteness.Long life:over 100 years underground without sunlight.
New Materials PROJECT SHOW
New Materials HDPE liner Welding machine
New Materials HDPE liner Packing and Shipping Details
For HDPE liner shipment, in order to avoiding water when shipping on the boat, we specially use a thin layer plastic firm to package the geomembane in the side, then white or black woven bags for outside, paper tube inside, easy to load and download.
Paste our label or as per client request, loading them into container safely at our factory, make all goods arriving clients no damage, keep perfect. They are packed in the woven bags 50m/roll,100m/roll or follow your demand
Shipping: load container directly from our plant by truck, then go to the port, than go your site by sea.
1, Separation: the prevention from intermixing of adjacent dissimilar soils and or materials
2, Filtration: the retaining of soil or other particles subject to hydrodynamic forces while allowing the passage of fluids into or through the geosynthetic.
3, Drainage: the collecting and transmitting of precipitation, ground water and or other liquids or gases along the plane of the geosynthetic.
4, Reinforcement: the use of the properties of a geosynthetic to improve the mechanical properties of soil or other construction materials.
5, Barrier: the prevention or reduction of the movement of any fluid through a construction by the use of a geosynthetic barrier.
6, Protection: the use of a geosynthetic material as a localised stress reduction or dissipation layer to prevent or reduce damage to a given surface, material or layer.
7, Surface erosion control: the use of a geosynthetic to prevent soil or other particle movements on the surface of a slope.
8, Stabilization: improvement of the mechanical behaviour of an unbound granular material by including one or more geosynthetic layers such that deformation under applied loads is reduced by minimizing movement of the unbound granular material.
9, Convenience:Reflective factor, good welding performance and convenient construction
1, Q: Are you the factory or trading company? Located?
A: 100% plant, not trading company, we are in Jinan city of Shandong Province in China.
2. Q: What's about your production capacity?
A: We produce 5 x 40ft container per day for HDPE geomembrane.
3. Q: How about your delivery time?
A: Within 7-14 days after deposit, we always deliver the goods according to customer's requirement.
4. Q: What's about the minimum order quantity?
A: The MOQ is 5000m2, customer can mix different sizes in one 20GP. We suggest at least 20GP,as by our exporting experience, 20GP container sea freight is more economic.
5. Q: How about quality guarantee of your liner?
A:1) Material Purchase Control. Our Material are imported from Iran and Saudi Arabia or Qatar. Those country specializing in better raw material.
2) Advanced production equipment, producing ASTM specification data.
3). This HDPE liner life can last up to 100 years when covered under the ground.
6. Q: Do you have stock?
A: All liners we send to customers are new liners. We don't have any stock to ensure customers use best new liners .
7. Q: Terms of payment
A: T/T and L/C
8. Q: Do you accept the OEM?
A: Yes
9. Q: Samples available and can I visit your factory?
A: Yes
Our relatied production
A: 100% plant, not trading company, we are in Jinan city of Shandong Province in China.
2. Q: What's about your production capacity?
A: We produce 5 x 40ft container per day for HDPE geomembrane.
3. Q: How about your delivery time?
A: Within 7-14 days after deposit, we always deliver the goods according to customer's requirement.
4. Q: What's about the minimum order quantity?
A: The MOQ is 5000m2, customer can mix different sizes in one 20GP. We suggest at least 20GP,as by our exporting experience, 20GP container sea freight is more economic.
5. Q: How about quality guarantee of your liner?
A:1) Material Purchase Control. Our Material are imported from Iran and Saudi Arabia or Qatar. Those country specializing in better raw material.
2) Advanced production equipment, producing ASTM specification data.
3). This HDPE liner life can last up to 100 years when covered under the ground.
6. Q: Do you have stock?
A: All liners we send to customers are new liners. We don't have any stock to ensure customers use best new liners .
7. Q: Terms of payment
A: T/T and L/C
8. Q: Do you accept the OEM?
A: Yes
9. Q: Samples available and can I visit your factory?
A: Yes
Our relatied production