OBOR HDPE Composite Geomembrane with Geotextile
OBOR Composite geomembrane is made from hdpe geomembrane composite with one layer or double layer geotextile, made by non woven geotextile and PE/PVC/CPE geomembrane Categories are including geotextile and geomembrane,geomembrane with non woven geotextile on both sides,non woven geotextile with geomembrane on both sides, multi-layer geotextile and geomembrane.
Composite geomembrane are widely used in water conservancy, landscaping, petrochemical industry, mining, salt industry, agriculture and aquacultrue, etc.
Composite geomembrane including:
(1) One layer geotextile and one layer membrane
Weight of base geotextile : 100g/m2-1000gm2 ; Thickness of geomembrane :0.1mm-1.5mm .
(2) Two layers geotextile and one layer membrane
Weight of base geotextile : 80g/m2-600gm2 ; Thickness of geomembrane :0.2mm-1.5mm .
(3) Multi-layers : Weight of base geotextile : 100g/m2-1000gm2 ; Thickness of geomembrane :0.1mm-1.5mm .
(4) Width : 1m-8m
(5) Length : 50m-100m
Composite geomembrane uses plastic film as the backing material, seepage control and non-woven composite geotechnical seepage control material, its seepage control performance mainly depends on the seepage properties of plastic film.Seepage control of the application of plastic film, both at home and abroad are mainly of polyvinyl chloride (PVC), polyethylene (PE) and ethylene/vinyl acetate copolymer (EVA), they are a kind of flexible polymer chemistry material, the proportion of small, extensibility, adapt to the deformation capacity, high corrosion resistance, good low temperature resistance, frost resistance performance is good.
|Product Description||Geomembrane Thickness||Mass per unit||Material|
|OBOR composite geomembrane||0.2||400||HDPE,( LDPE, LLDPE, PVC, EVA )|
|OBOR composite geomembrane||0.5||700||HDPE,( LDPE, LLDPE, PVC, EVA )|
|OBOR composite geomembrane||0.8||1000||HDPE,( LDPE, LLDPE, PVC, EVA )|
Certificate: ISO, SGS
Color: White, Black
Packing: white fabric bag or black PE bag outside or as required
Quality Control: Third party test and factory lab test
Composite geomembrane Features.
4. High tearing resistance
4. High tearing resistance
Composite Geomembrane Technical Data (Confirming GB/T17642-1998 standard)
|Product weight (g/m2)|
|SPEC||1 layer geotextile+1 layer geomembrane|
|2 layer geotextile+1 layer geomembrane|
|Breaking strength ,kN/m||5.0||7.5||10.0||12.0||14.0||16.0||18.0|
|Elongation at break||30---100|
|Tear strength , kN||0.15||0.25||0.32||0.40||0.48||0.56||0.62|
|CBR Mullen burst strength||1.1||1.5||1.9||2.2||2.5||2.8||3.0|
|Vertical permeability coefficient||k *10-11~k*10-13|
1. Normally white fabric bag or black PE bag outside
2. As required if any special request.
3. OEM is acceptatble
4. Delivery time: within 10 days after receiving payment
1. Factory lab to test the composite geomembrane quality
2. Third party test is available
3. Welding machine is available for one-stop purchase
4. Welding team is also available for abroad installation
5. Project suggestions & solutions are available based on our rich project experience
6. Various product standard to meet your project needs.
7. Free samples are available
Composite Geomembrane applied range:
(1).Landscape engineering: garage top greening, roof garden, football field, golf course, beach project.
(2).Municipal engineering: road base, subway, tunnel, landfill.
(3).Construction engineering : upper or bottom layer of building foundation, basement wall, bedding filtration and heat insulation.
(4).Traffic engineering: highway, railway basement, dam and slope.