self adhesive waterproof roll waterproof
The product is produced with SBS elastomer and bitumen as raw materials, using polyethylene film aluminum coated on the upward or no file(both side self-adhesive) while self-adhesive protection layer on the downward surface. It has a widely prospect new construction waterproof materials. It has properties as good self-adhesionleaking, cold flexibility, especially in self-adhesion. That is unique product in waterproof and application.
Ensure all surfaces are clean, dry and dust-free. Remove any loose particles and any rust with a wire brush and soft broom;
Roll out the membrane;
Remove the backing paper and place the adhesive side to the previously prepared surface;
To ensure a tight contact-smooth the tape down with a dry cloth, removing all the air bubbles;
Press the tape to the surface firmly once in position;
Smooth flat all edges with a wallpaper roller or trowel;
After use reseal pack and store upright in cool, dry condition.
|Type||Polyester Tire / Compound Tire|
|Surface Materials||PE / PET|
Products got the approval of ISO9001 cerficate, ISO14001 certificate.And some products can meet American ASTM and CE international standards.
FAQ (Frequently Asked Questions)